Voice and data router with high variability of configuration and utilization. Can be used as BRI/E1/GSM/VoIP gateway TDM/VoIP/ISDN PBX, multiplexer and signaling converter.
Iterfaces and modules:
- 1x E1/T1, signaling ISDN DSS1
- 4x BRI S0 S/T (100 Ohm, RJ45, with line powering option, signaling ISDN DSS1)
- 2x Ethernet 10/100BT, LAN/WAN
- 1x RS232 console
- up to 12x GSM
- 1x SD card for CDRS or LOGS
Analog: (realized by extension modules)
It's necessary to order analog modules separately
- 8x FXS module (quadruple), up to 32 FXS ports (terminated with RJ“XX“ patch panel), or up to 16 FXS built-in RJ45 ports
- 8x FXO module (double), up to 16 FXO ports (terminated with RJ“XX“ patch panel or with built-in RJ45 ports)
- 3x E&M module (double), up to 6 E&M ports (terminated with patch panel or 6x RJ45 ports), signaling type V. permanent
- 8x LB module (quadruple), up to 32 LB ports
System & HW:
- OS uCLINUX
- Asterisk SW v1.4x
- BLACKFIN processor BF527 600MHz
- 64 MB RAM
- 128 MB NAND Flash
- 8 MB DATA Flash
- Optional SD card
Signaling:
SIP, ISDN DSS1, Euro ISDN EDSS, ETS 300
GSM parameters:
- up to 12x GSM/GPRS, 2G, quad-band 850/900/1800/1900 MHz, SIMcom modules, voice only, data and SMS not supported
Voice codecs:
- G.711 (A-law, μ-law)
- G.726
- G.729 annex A&B (license not included)
Management:
- Remote LAN/WAN management CLI-SSH, FTP, HTTP
- Web management – GUI
- Terminal access
- Local control interface RS232
- SNMP protocol
- QoS, TOS / DiffServ
Features:
- Maximum 10 concurrent VoIP/SIP calls G.711 (8 calls G.729), with SW echo canceller
- SW echo canceller up to 128 ms
- Internal timeslot cross-connect for TDM calls (min. delay)
- DTMF-RFC 2833 generating and detection
- Call progress tone generating/detection (dial, busy, etc.)
- Caller ID generating and detection
- Informating announcements playback
- AOC generating to E1/BRI
- Fax via G.711 (T.38 not supported)
- Dial plan, CDR, LCR
- Basic data routing
- Integrated Firewall
- Network protocol: IPV4, TCP, UDP, DHCP, DNS, NAT, HTTP, FTP, TFTP, SSH
- Power supply: 230V AC 50 Hz, or -48V DC
- Dimensions: 1U / 19" rack
Product code:
ITX 495 02 - Voice & Data Router BA
Variants: